Return to Stylus Studio EDIFACT home page. Return to Stylus Studio EDIFACT D99A Messages page. Instruction contract status message
0. INTRODUCTIONThis specification provides the definition of the Instruction contract status message (IFTMCS) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPEThis paper provides the definition of the Instruction Contract Status Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI). This message is a single consignment based message, being aligned with other single consignment based messages such as the booking messages (IFTMBP, IFTMBF and IFTMBC), the Instruction Message (IFTMIN) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods. They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names. 1.1. Functional DefinitionA message from the party providing the transport/forwarding services to the party that issued the instructions for those services stating the actual details, terms and conditions (charges when applicable) of the service and of the consignment involved. In addition it can be used for the exchange of contract information between carriers mutually. 1.2. Field of ApplicationThe Instruction contract status message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3. PrinciplesThe party providing the transport services will send an instruction contract status message, usually after receipt of the instruction message. The message can replace the actual contractual document such as for instance a Waybill, under those circumstances where there are no legal or other restrictions. The message might contain information concerning charges but should not be seen as a replacement for the invoice.
A number of generic transport terms are used in this specification, to be described as:
2. REFERENCESSee UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS3.1. Standard terms and definitionsSee UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION4.1. Data Segment ClarificationThis section should be read in conjunction with the Segment Table which indicates mandatory, conditional and repeating requirements. 0010 UNH, Message headerA service segment starting and uniquely identifying a message. The message type code for the Instruction contract status message is IFTMCS. Note: Instruction contract status messages conforming to this document must contain the following data in segment UNH, composite S009:
0020 BGM, Beginning of messageA segment to indicate the beginning of a message and to transmit identifying number and type of the message. 0030 CTA, Contact informationA segment to identify a person or department to whom communication should be directed. 0040 COM, Communication contactA segment to identify a communication number of a person or department to whom communication should be directed. 0050 DTM, Date/time/periodA segment to indicate a date and time applying to the whole message, e.g., date and time of document issue. 0060 TSR, Transport service requirementsA segment to identify the contract, conditions of carriage, services, and priority requirements for the transport. 0070 CUX, CurrenciesA segment to indicate default currencies and exchange rates. 0080 MOA, Monetary amountA segment to indicate a monetary value for entire consignment, e.g. insured value, invoice amount, disbursements, etc. 0090 FTX, Free textA segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information. 0100 CNT, Control totalA segment to specify totals for a consignment. 0110 Segment Group 1: LOC-DTMA group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transhipment. 0120 LOC, Place/location identificationA segment to identify a location applying to the entire message. 0130 DTM, Date/time/periodA segment to indicate date(s) and time(s) relating to the location. 0140 Segment Group 2: TOD-LOCA group of segments to specify terms of delivery and related locations. 0150 TOD, Terms of delivery or transportA segment to specify the applicable terms of delivery. 0160 LOC, Place/location identificationA segment to specify a location related to the terms of delivery. 0170 Segment Group 3: RFF-DTMA group of segments containing a reference and constants which apply to the entire message. 0180 RFF, ReferenceA segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message Function, Coded in segment BGM), booking reference, order number, insurance contract, etc. 0190 DTM, Date/time/periodA segment to indicate date and time relating to the reference. 0200 Segment Group 4: GOR-DTM-LOC-SEL-FTX-SG5A group of segments to identify customs and other governmental procedures and required documents. 0210 GOR, Governmental requirementsA segment to indicate applicable governmental procedures related to import, export and transport of the goods. 0220 DTM, Date/time/periodA segment to indicate date and time related to documents and/or Customs- and/or governmental procedures for the consignment (e.g. date of issuing of Customs document, expiration date of Customs document, etc.). 0230 LOC, Place/location identificationA segment to specify locations associated with Customs-and/or governmental procedures for the consignment (e.g. Customs office of exit, Customs office of destination, etc.). 0240 SEL, Seal numberA segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the consignment. 0250 FTX, Free textA segment to provide additional governmental requirements information. 0260 Segment Group 5: DOC-DTMA group of segments to specify required documents by government. 0270 DOC, Document/message detailsA segment to indicate a document required by government. 0280 DTM, Date/time/periodA segment to specify the date/time related to the required document. 0290 Segment Group 6: CPI-RFF-CUX-LOC-MOAA group of segments to indicate charge methodology which applies to the entire message. 0300 CPI, Charge payment instructionsA segment to indicate default charge methodology. 0310 RFF, ReferenceA segment to indicate a reference relating to the CPI segment, such as charge reference number. 0320 CUX, CurrenciesA segment to specify the payment currency related to the charge methodology. 0330 LOC, Place/location identificationA segment to identify the place of charge collection. 0340 MOA, Monetary amountA segment to identify the monetary amount associated with the charges. 0350 Segment Group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTYA group of segments to specify charge calculations associated with the transport. 0360 TCC, Transport charge/rate calculationsA segment to specify charge. 0370 LOC, Place/location identificationA segment to indicate a location. 0380 FTX, Free textA segment to specify processable supplementary information associated with charge. 0390 CUX, CurrenciesA segment to specify currencies associated with charge. 0400 PRI, Price detailsA segment to specify price details such as price (e.g. 100 dollars) and unit price basis (e.g. per 1000 kilograms). 0410 EQN, Number of unitsA segment to specify the number of units to which the unit price basis applies. 0420 PCD, Percentage detailsA segment to indicate the applicable reduction or surcharge percentage details. 0430 MOA, Monetary amountA segment to specify a monetary amount, such as prepaid amount, discount or total amount. 0440 QTY, QuantityA segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 0450 Segment Group 8: TDT-DTM-TSR-SG9-SG10A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s). 0460 TDT, Details of transportA segment to indicate information related to a certain stage of the transport, such as mode, means and carrier. 0470 DTM, Date/time/periodA segment to indicate departure/arrival date and time. 0480 TSR, Transport service requirementsA segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport. 0490 Segment Group 9: LOC-DTMA group of segments to specify a location and date/time related to this leg of transport. 0500 LOC, Place/location identificationA segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport. 0510 DTM, Date/time/periodA segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location. 0520 Segment Group 10: RFF-DTMA group of segments to specify an additional reference related to the stage of the transport. 0530 RFF, ReferenceA segment to specify the additional reference. 0540 DTM, Date/time/periodA segment to identify date and time relating to the reference. 0550 Segment Group 11: NAD-LOC-MOA-SG12-SG13-SG14-SG15-SG16-SG17A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party. 0560 NAD, Name and addressA segment to identify the party's name, address, and function. 0570 LOC, Place/location identificationA segment to indicate location where a specific function will be performed. 0580 MOA, Monetary amountA segment to identify the monetary amount associated with the party. 0590 Segment Group 12: CTA-COMA group of segments identifying a contact and its communications related to the party. 0600 CTA, Contact informationA segment to identify a person or department within a party. 0610 COM, Communication contactA segment to identify a communication number of a person or department to whom communication should be directed. 0620 Segment Group 13: DOC-DTMA group of segments to identify required documents. 0630 DOC, Document/message detailsA segment to identify a document required of, by or for the party. 0640 DTM, Date/time/periodA segment to identify date and time relating to the reference. 0650 Segment Group 14: TCC-CUX-PRI-EQN-PCD-MOA-QTYA group of segments to specify charges associated with the party. 0660 TCC, Transport charge/rate calculationsA segment to specify charges associated with the party. 0670 CUX, CurrenciesA segment to specify currency details related to the freight charge. 0680 PRI, Price detailsA segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 0690 EQN, Number of unitsA segment to specify the number of units to which the unit price basis applies. 0700 PCD, Percentage detailsA segment to indicate the applicable reduction or surcharge percentage details. 0710 MOA, Monetary amountA segment to specify a monetary amount, such as prepaid amount, discount or total amount. 0720 QTY, QuantityA segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 0730 Segment Group 15: RFF-DTMA group of segments to specify a reference related to the party. 0740 RFF, ReferenceA segment to identify a reference used by a party. 0750 DTM, Date/time/periodA segment to indicate date and time relating to the reference. 0760 Segment Group 16: CPI-RFF-CUX-LOC-MOAA group of segments to identify the charge and its amount to be paid by the party. 0770 CPI, Charge payment instructionsA segment to identify default charge methodology. 0780 RFF, ReferenceA segment to indicate a reference relating to the CPI segment, such as charge reference number. 0790 CUX, CurrenciesA segment to indicate payment currency related to the charge methodology. 0800 LOC, Place/location identificationA segment to identify the place of charge collection. 0810 MOA, Monetary amountA segment to identify the monetary amount associated with the charges. 0820 Segment Group 17: TSR-RFF-LOC-TPL-FTXA group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party. 0830 TSR, Transport service requirementsA segment to specify a required service for the transport, such as re-icing. 0840 RFF, ReferenceA segment to identify a commercial agreement related to the service requirement. 0850 LOC, Place/location identificationA segment to indicate the location where the required service must be performed, such as place of re-icing. 0860 TPL, Transport placementA segment to identify the means of transport to which the service requirement applies. 0870 FTX, Free textA segment to provide any additional information related to the service requirement. 0880 Segment Group 18: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-PCD-SG19-GDS-SG20-SG21-SG22-SG23-SG24-SG25-SG27-SG29- SG30 A group of segments to describe the goods items for which transport is undertaken. 0890 GID, Goods item detailsA segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging. 0900 HAN, Handling instructionsA segment to specify handling instructions relating to the goods item. 0910 TMP, TemperatureA segment to specify a temperature setting for a goods item. 0920 RNG, Range detailsA segment to specify a temperature range setting for a goods item. 0930 TMD, Transport movement detailsA segment to specify transport movement details for a goods item. 0940 LOC, Place/location identificationA segment to specify a country associated with a goods item, such as country of origin, or country of destination. 0950 MOA, Monetary amountA segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc. 0960 PIA, Additional product idA segment to specify article numbers. 0970 FTX, Free textA segment to specify processable supplementary information relating to the goods item. 0980 PCD, Percentage detailsA segment to specify percentages related to cargo shipped in controlled atmosphere equipment such as percentage humidity. 0990 Segment Group 19: NAD-DTMA group of segments to identify different places of collection and/or delivery for the goods item. 1000 NAD, Name and addressA segment to specify an address of a place of collection or delivery for a goods item. 1010 DTM, Date/time/periodA segment to indicate date and time relating to the place of collection or delivery. 1020 GDS, Nature of cargoA segment to describe the nature of cargo. 1030 Segment Group 20: MEA-EQNA group of segments to specify measurements applicable to a goods item. 1040 MEA, MeasurementsA segment to specify measurements, other than dimensions, applicable to a goods item. 1050 EQN, Number of unitsA segment to specify the number of equipment units to each of which the given measurement applies. 1060 Segment Group 21: DIM-EQNA group of segments to specify dimensions applicable to a goods item. 1070 DIM, DimensionsTo specify dimensions applicable to a goods item. 1080 EQN, Number of unitsA segment to specify the number of equipment units to each of which the given dimension applies. 1090 Segment Group 22: RFF-DTMA group of segments to identify references to a goods item. 1100 RFF, ReferenceA segment to identify a reference to a goods item. 1110 DTM, Date/time/periodA segment to indicate date and time relating to the reference. 1120 Segment Group 23: PCI-RFF-DTM-GINA group of segments to specify marks and numbers of a goods item. 1130 PCI, Package identificationA segment to specify marks and numbers of a good item. 1140 RFF, ReferenceA segment to identify a reference relating to the marks and numbers. 1150 DTM, Date/time/periodA segment to identify date and time of the reference. 1160 GIN, Goods identity numberA segment to specify identifying numbers related to transport units, such as batch numbers, serial numbers, etc. 1170 Segment Group 24: DOC-DTMA group of segments to specify documents and associated date(s) and time(s) for a goods item. 1180 DOC, Document/message detailsA segment to specify a document prepared for a goods item. 1190 DTM, Date/time/periodA segment to associate date and time with the prepared document. 1200 Segment Group 25: TPL-SG26A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement. 1210 TPL, Transport placementA segment to identify transport details for a goods item. 1220 Segment Group 26: MEA-EQNA group of segments to identify measurements. 1230 MEA, MeasurementsA segment to specify the distribution of a goods item among the transport details. 1240 EQN, Number of unitsA segment to specify the number of equipment units to each of which the given measurement applies. 1250 Segment Group 27: SGP-SEQ-SG28A group of segments to specify the distribution of a goods item among the transport equipment. 1260 SGP, Split goods placementA segment to identify the equipment in which goods are transported. 1270 SEQ, Sequence detailsA segment to indicate where cargo is stowed in a container (in the front, in the middle, in the rear etc.) by use of a sequence number. The lowest number indicates stowage in the front of the container with higher numbers indicating that the cargo is stowed more toward the rear door. 1280 Segment Group 28: MEA-EQNA group of segments to identify measurements. 1290 MEA, MeasurementsA segment to specify measurements of that portion of the goods item in the equipment. 1300 EQN, Number of unitsA segment to specify the number of equipment units to each of which the given measurement applies. 1310 Segment Group 29: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOCA group of segments to specify charge associated with the goods item. 1320 TCC, Transport charge/rate calculationsA segment to specify charge associated with the goods item. 1330 CUX, CurrenciesA segment to specify currencies associated with charge. 1340 PRI, Price detailsA segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 1350 EQN, Number of unitsA segment to specify the number of units to which the unit price basis applies. 1360 PCD, Percentage detailsA segment to indicate the applicable reduction or surcharge percentage details. 1370 MOA, Monetary amountA segment to specify a monetary amount, such as prepaid amount, discount or total amount. 1380 QTY, QuantityA segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 1390 LOC, Place/location identificationA segment to indicate location where a specific function will be performed. 1400 Segment Group 30: DGS-FTX-SG31-SG32-SG33A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes. 1410 DGS, Dangerous goodsA segment to indicate the class of dangerous goods, packing group, etc. 1420 FTX, Free textA segment to specify the dangerous goods technical name and to specify any additional dangerous goods information. 1430 Segment Group 31: CTA-COMA group of segments to identify a contact to whom communication regarding the dangerous goods can be directed. 1440 CTA, Contact informationA segment to identify a person or department. 1450 COM, Communication contactA segment to identify a communication number of a person or department. 1460 Segment Group 32: MEA-EQNA group of segments to identify dangerous goods measurements. 1470 MEA, MeasurementsA segment to specify measurements of the dangerous goods. 1480 EQN, Number of unitsA segment to specify the number of equipment units to each of which the given measurement applies. 1490 Segment Group 33: SGP-SG34A group of segments to specify the distribution of the dangerous goods among the transport equipment. 1500 SGP, Split goods placementA segment to identify the equipment in which the dangerous goods are transported. 1510 Segment Group 34: MEA-EQNA group of segments to identify dangerous goods measurements. 1520 MEA, MeasurementsA segment to specify measurements of that portion of the dangerous goods in the equipment. 1530 EQN, Number of unitsA segment to specify the number of equipment units to each of which the given measurement applies. 1540 Segment Group 35: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-RFF-SG36-SG37-SG38 A group of segments to specify equipment in which goods are 1550 EQD, Equipment detailsA segment to specify equipment, and equipment size and type used in the transport. 1560 EQN, Number of unitsA segment to specify number of pieces of equipment required. 1570 TMD, Transport movement detailsA segment to specify transport movement details for the equipment. 1580 MEA, MeasurementsA segment to specify measurements, other than dimensions, associated with the equipment, such as weight. 1590 DIM, DimensionsA segment to specify dimensions applicable to equipment. 1600 SEL, Seal numberA segment to identify seal and seal issuer associated with the equipment. 1610 TPL, Transport placementA segment to identify transport details for the equipment. 1620 HAN, Handling instructionsA segment to specify handling instructions for specified equipment. 1630 TMP, TemperatureA segment to specify a temperature setting for the equipment. 1640 FTX, Free textA segment to specify processable supplementary information associated with the equipment. 1650 RFF, ReferenceA segment to specify a reference number to equipment. 1660 Segment Group 36: TCC-CUX-PRI-EQN-PCD-MOA-QTYA group of segments to specify charges associated with the equipment. 1670 TCC, Transport charge/rate calculationsA segment to specify a charge associated with the equipment. 1680 CUX, CurrenciesA segment to specify currency details related to the freight charge. 1690 PRI, Price detailsA segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram). 1700 EQN, Number of unitsA segment to specify the number of units to which the unit price basis applies. 1710 PCD, Percentage detailsA segment to indicate the applicable reduction or surcharge percentage details. 1720 MOA, Monetary amountA segment to specify a monetary amount, such as prepaid amount, discount or total amount. 1730 QTY, QuantityA segment to indicate a quantity, for example actual weight, declared weight or chargeable weight. 1740 Segment Group 37: NAD-DTMA group of segments to identify different equipment pick-up or drop-off places. 1750 NAD, Name and addressA segment to specify a pick-up or drop-off address. 1760 DTM, Date/time/periodA segment to indicate date and time relating to pick-up or drop-off. 1770 Segment Group 38: EQA-EQNA group of segments to specify the attached equipment and related number of pieces. 1780 EQA, Attached equipmentA segment to identify attached or related equipment such as a chassis attached to a container. 1790 EQN, Number of unitsA segment to specify number of pieces of equipment required. 1800 UNT, Message trailerA service segment ending a message, giving the total number of segments in the message and the control reference number of the message. 4.2. Data segment index (Alphabetical sequence by tag)
4.3. Message structure4.3.1. Segment table
Return to Stylus Studio EDIFACT D99A Messages page. |
Site Map | Privacy Policy | Terms of Use | Trademarks |