0. INTRODUCTION
1. SCOPE
   1. Functional definition
   2. Field of application
   3. Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
   1. Standard terms and definitions
4. MESSAGE DEFINITION
   1. Data segment clarification
   2. Data segment index (alphabetical sequence)
   3. Message structure
      1. Segment table

This specification provides the definition of the Passenger list message (PAXLST) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.

This Passenger List Message (PAXLST) permits the transfer of passenger/crew data from a Customs, Immigration or other designated authority in the country of departure to the appropriate authorities in the country of arrival of the means of transport.

Where national privacy legislation permits, and with the agreement of all parties involved, this message may also be exchanged between carriers and Customs, Immigration, Police or any designated authorities.

This transfer of data may occur upon departure from the sending agency and prior to arrival of the vessel/ flight at the receiving agency. This is to permit the designated authority at the place of destination to screen this data and take timely decisions related to the clearance of passengers and crew.

The transfer of data may also occur prior to departure, carriers may transmit passenger listings to customs and immigration for pre-arrival clearance.

Endorsement of this message by the Customs Cooperation Council does not necessarily mean endorsement by national Immigration or Police authorities, nor does it place any obligations on parties to apply the message.

The Passenger list message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.

This message may be applied for international passenger movement and is not dependent on the mode of transport.

It is envisaged that the message will:

(a) facilitate the clearance of low risk passengers/crew.

(b) allow Customs, Immigration or police authorities to more effectively and efficiently concentrate resources on areas of highest risk.

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.

This section should be read in conjunction with the Segment Table which indicate mandatory, conditional and repeating requirements.

The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message:

• Where a choice of code or text is given only the code element should be used wherever possible.
• Data that is not necessary to meet the functional requirements of the message should not be included.
• Free text information within the message should be avoided as this inhibits automatic processing.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Passenger list message is PAXLST.

Note: Passenger list messages conforming to this document must contain the following data in segment UNH, composite S009:

0020 BGM, Beginning of message

A segment to indicate the type and function of the message.

0030 RFF, Reference

A segment to specify message reference.

0040 DTM, Date/time/period

A segment to specify associated dates/times as required related to the message.

0050 Segment Group 1: NAD-CTA-COM

A group of segments to specify name/address, person or department in the originating administration who can provide further information about the data in the message.

0060 NAD, Name and address

A segment to identify the name, address and related function.

0070 CTA, Contact information

A segment to identify a person or department in the sending administration to contact.

0080 COM, Communication contact

A segment to identify communication numbers of departments or persons to whom communication should be directed (e.g. telephone/fax number).

0090 Segment Group 2: TDT-DTM-SG3

A group of segments to indicate information related to each leg of the mode of transport.

0100 TDT, Details of transport

A segment to specify details of transport related to each leg, including means of transport, mode of transport name/number of vessel/vehicle/flight.

0110 DTM, Date/time/period

A segment to specify associated dates/times as required related to details of transport.

0120 Segment Group 3: LOC-DTM

A group of segments indicating associated locations and dates.

0130 | LOC, Place/location identification

A segment to specify locations such as place of departure, place of destination, country of ultimate destination, country/place of transit, country of transit termination, etc. of the means of transport.

0140 DTM, Date/time/period

A segment to specify associated dates/times as required related to locations.

0150 Segment Group 4: NAD-ATT-DTM-MEA-GIS-FTX-LOC-COM-SG5-SG6-SG7

A group of segments to indicate if passenger or crew member, personal details (name, title, sex and marital status), date of birth, attributes such as height, hair and eye colour, and other related details.

0160 NAD, Name and address

A segment specifying name of the passenger or crew member.

0170 ATT, Attribute

A segment specifying passenger's/crew attributes such as complexion and build.

0180 DTM, Date/time/period

A segment to specify date of birth.

0190 MEA, Measurements

To specify physical measurements, (e.g. height).

0200 GIS, General indicator

A segment to specify indicators such as risk assessment.

0210 FTX, Free text

A segment specifying other related passenger/crew information (e.g. ticketing information).

0220 LOC, Place/location identification

A segment indicating country of nationality, country of birth and port/place of origin (embarkation), transit and destination (disembarkation) of a passenger/crew.

0230 COM, Communication contact

A segment to identify a communication number of a department or a person to whom communication should be directed (e.g. passenger telephone details).

0240 Segment Group 5: DOC-DTM-GIS-RFF-LOC-CPI-QTY

A group of segments to indicate the travel document details, date and time, reference, place/location identification, charge payment instructions and quantity.

0250 DOC, Document/message details

A segment identifying passenger/crew travel documents, such as passports, visas etc.

0260 DTM, Date/time/period

A segment to specify associated dates/times related to documents.

0270 GIS, General indicator

A segment to specify processing indicators, such as document holder, alias, endorsee etc.

0280 RFF, Reference

A segment to specify document reference.

0290 LOC, Place/location identification

A segment indicating the country that issued the document.

0300 CPI, Charge payment instructions

A segment to identify methods of payment for transport charges.

0310 QTY, Quantity

A segment to identify passenger type counts (e.g. child, adult, infant, etc.).

0320 Segment Group 6: GID-FTX-QTY

A group of segments indicating the personal effects associated with a passenger or crew member.

0330 + GID, Goods item details

A segment to identify the line item number, as well as the type and number of packages.

0340 + FTX, Free text

A segment to indicate the description of the effects.

0350 + QTY, Quantity

A segment to indicate the quantity of the effects.

0360 Segment Group 7: TDT-FTX

A group of segments identifying transport details related to the passenger or crew member.

0370 TDT, Details of transport

A segment to identify transport details related to the NAD segment.

0380 FTX, Free text

A segment to identify free text information on passenger transport details.

0390 CNT, Control total

A segment specifying control totals such as the total number of passengers/ crew members in the message.

0400 AUT, Authentication result

A segment to specify the results of the application of an authentication procedure, including the authenticity of sender to ensure integrity of data.

0410 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.

	ATT	Attribute
	AUT	Authentication result
	BGM	Beginning of message
	CNT	Control total
	COM	Communication contact
	CPI	Charge payment instructions
	CTA	Contact information
	DOC	Document/message details
	DTM	Date/time/period
	FTX	Free text
	GID	Goods item details
	GIS	General indicator
	LOC	Place/location identification
	MEA	Measurements
	NAD	Name and address
	QTY	Quantity
	RFF	Reference
	TDT	Details of transport
	UNH	Message header
	UNT	Message trailer

Change indicators
plus sign		An addition.
asterisk		Addition/substraction/change to a code entry for a particular data element.
hash or pound sign		Changes to names.
vertical bar		Changes to text for descriptions, notes and functions.
minus sign		A deletion.
letter X		Marked for deletion.