0. INTRODUCTION
1. SCOPE
   1. Functional definition
   2. Field of application
   3. Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
   1. Standard terms and definitions
4. MESSAGE DEFINITION
   1. Segment clarification
      1. Header section
      2. Detail section
   2. Segment index (alphabetical sequence by tag)
   3. Message structure
      1. Segment table

This specification provides the definition of the Job order message (JOBOFF) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.

A message specifying details for one or more vacancies (occupation, salaries, experiences, work and contract conditions) for an employer to the employment agency.

The Job order message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.

The intention of the message is to provide detailed information of one or more jobs or vacancies offered by an employer to an employment agency or another employment agency. A Job Order Message is transmitted from an employer to an employment agency. A Job Order Message may contain detailed information about the requirements of an applicant for the job, e.g. age, sex, occupation or occupation type, location of the job, education, knowledge, experiences, salaries, work and contract conditions. A Job Order Message may also contain detailed information of the salary offered, a job application and/or arrangements for an interview.

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.

This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.

The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message: All specified dates or times should be in the format 'yymmdd' or 'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.) Where a choice of code or text is given only the code element should be used wherever possible. Conditional data that is not required in the message should not be included. Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of a group.

Information to be provided in the Header section:

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Job order message is JOBOFF.

Note: Job order messages conforming to this document must contain the following data in segment UNH, composite S009:

0020 BGM, Beginning of message

A segment by which the sender must uniquely identify the job order by means of its type and number and, when necessary, its function. The response type may be used to instruct the receiver to give a confirmation message to this message.

0030 DTM, Date/time/period

A segment specifying general dates and, when relevant, times related to the whole message. The segment must be specified at least once to identify the document date. The Date/time/period segment within other Segment groups should be used whenever the date or time or period requires to be logically related to another specified data item.

0040 Segment Group 1: PNA-ADR-LOC-DTM-SG2

A group of segments identifying the parties with associated information.

0050 PNA, Party identification

A segment identifying names of the parties, in coded or clear form, and their functions relevant to the Job Order Message. Identification of the enterprise and the job administration parties is mandatory for the Job Order Message. It is recommended that, where possible, only the coded form of the party identification should be specified, e.g. where the enterprise and the job administration are known to each other, thus only the coded identification is required.

0060 ADR, Address

A segment indicating the address of the relevant party.

0070 LOC, Place/location identification

A segment giving more specific location information of the party specified in the PNA segment, e.g. internal site or building number.

0080 DTM, Date/time/period

A segment specifying the date and time related to the PNA segment.

0090 Segment Group 2: CTA-COM

A group of segments giving contact details of the specific person or department within the party identified in the PNA segment.

0100 CTA, Contact information

A segment to identify a person or department and their function, to whom communications should be directed.

0110 COM, Communication contact

A segment to identify a communication type and number for the contact specified in the CTA segment, e.g. telephone-number, fax-number, telex-number.

0120 Segment Group 3: RFF-DTM

A group of segments for giving references and, where necessary, their dates, relating to the whole message.

0130 RFF, Reference

A segment identifying the reference by its number related to the whole message.

0140 DTM, Date/time/period

A segment specifying the date or time related to the reference.

0150 Segment Group 4: GIS-FTX

A group of segments specifying general processing indicators and, when necessary, additional textual information, relevant for the whole message.

0160 X GIS, General indicator

A segment specifying general indicators for the whole message.

0170 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

Information to be provided in the Detail section:

0180 UNS, Section control

A mandatory service segment placed before the first user segment in the detail section to avoid segment collision.

0190 Segment Group 5: RFF-RNG-DTM-QTY-SG6-SG7-SG8-SG9-SG10-SG13-

SG17 A group of segments providing details of the individual offered job or vacancy. There must be at least one occurrence of Segment group 5 within a Job Order Message. This Segment group may be repeated to give information about several other offered jobs or vacancies. The Segment group 5 gives information about the required occupation or profession and may give additional requirements of the job, the remuneration and the arrangements for a job application or interview.

0200 RFF, Reference

A segment identifying the offered job by a number, given by the enterprise, e.g. job order number of the enterprise.

0210 RNG, Range details

A segment to identify a range of age for the required person, identified in the DTM of group 6.

0220 DTM, Date/time/period

A segment specifying date and, when relevant, time relating to the job offered. Examples of the use of this DTM segment are: order date or time (of the enterprise), expire date (of the job order), required starting date of the job.

0230 QTY, Quantity

A segment identifying the number of vacancies.

0240 Segment Group 6: PNA-DTM-LOC-NAT-PDI-DOC

A group of segment identifying personal information regarding a job order.

0250 PNA, Party identification

A segment identifying type of identity of a requested person for a job.

0260 DTM, Date/time/period

A segment specifying requested limits regarding date of birth.

0270 LOC, Place/location identification

A segment specifying the country, place of residence requested for a person related to the job ordered.

0280 NAT, Nationality

A segment specifying the nationality, or group of nationalities, of a person requested for a job order.

0290 PDI, Person demographic information

A segment indicating requirements regarding gender and marital status for a job.

0300 DOC, Document/message details

A segment indicating which type of document(s) an applicant must have in his possession.

0310 Segment Group 7: GIS-FTX

A group of segments specifying general processing indicators and, when necessary, additional textual information, relevant for the job offered.

0320 X GIS, General indicator

A segment specifying general indicators related to the job offered.

0330 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0340 Segment Group 8: RFF-DTM

A group of segments for giving references and, where necessary, their dates, relevant to the job offered.

0350 RFF, Reference

A segment for specifying references relevant to the job offered.

0360 DTM, Date/time/period

A segment specifying the date or time related to the reference.

0370 Segment Group 9: RCS-RFF-DTM-FTX

A group of segments identifying requirements or conditions for the job offered.

0380 RCS, Requirements and conditions

A segment to give, in coded form, requirements of a job offered.

0390 RFF, Reference

A segment identifying the referenced document by its number and, where appropriate, a line number.

0400 DTM, Date/time/period

A segment indicating the date or time details relating to the references.

0410 FTX, Free text

A segment with free text information for the requirements of the job offered, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments, e.g. advertisement of the job. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0420 Segment Group 10: EMP-LOC-SG11-SG12

A group of segments identifying a qualification for the required job and attributes, such as education and experience.

0430 EMP, Employment details

A segment to identify the related area or sector of a qualification and a qualification, in coded or clear form, related to the job offered.

0440 LOC, Place/location identification

A segment indicating the location, where the offered job should be performed.

0450 Segment Group 11: ATT-FTX-PTY

A group of segments giving coded information about requirements for the profession or job offered regarding educational qualifications and experience and, when necessary, priority of the information and additional textual information.

0460 ATT, Attribute

A segment identifying, in coded form, the requirements for the profession or job offered. The codes are related to education, job experience, special knowledge and required qualifications.

0470 FTX, Free text

A segment with free text information for special knowledge, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0480 PTY, Priority

A segment identifying the priority of requirements for a job offered.

0490 Segment Group 12: LAN-GIS

A group of segments giving information about languages and experiences of languages.

0500 LAN, Language

A segment specifying a language in coded or clear form.

0510 X GIS, General indicator

A segment specifying general indicators of the experience of a language.

0520 Segment Group 13: SAL-FTX-DTM-SG14-SG15-SG16

A group of segments giving information about the type and the basic conditions of the remuneration offered. It may contain a remuneration amount or a remuneration range and additional remuneration benefits.

0530 SAL, Remuneration type identification

A segment identifying the type of the remuneration offered and, if required, the name of the remuneration type or contract.

0540 FTX, Free text

A segment with free text information for the remuneration type or contract, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0550 DTM, Date/time/period

A segment specifying the dates and/or times related to the remuneration offered.

0560 Segment Group 14: ATT-FTX

A group of segments giving attribute information, in coded form, for the remuneration offered and, where necessary, additional textual information.

0570 ATT, Attribute

A segment identifying additional remuneration information and other benefits offered in coded form. The codes are related to working conditions, working time, employment contract, piece work and remuneration benefits.

0580 FTX, Free text

A segment with free text information for additional remuneration benefits, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0590 Segment Group 15: GIS-FTX

A group of segments specifying general processing indicators and, when necessary, additional textual information, relevant for the remuneration offered.

0600 X GIS, General indicator

A segment specifying general indicators related to the remuneration offered.

0610 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0620 Segment Group 16: MOA-RNG-FTX

A group of segments specifying the type and the amount of the remuneration or a remuneration range offered.

0630 MOA, Monetary amount

A segment giving information about the type and the amount of the remuneration offered.

0640 RNG, Range details

A segment to identify a remuneration for the job offered, when an exact remuneration amount in the MOA segment is not available. The remuneration range is related to the type of remuneration in the MOA segment.

0650 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0660 Segment Group 17: PNA-ADR-GIS-LOC-FTX-SG18-SG19

A group of segments identifying the parties involved with an application or interview of a person for the job with associated information.

0670 PNA, Party identification

A segment identifying names and addresses of the parties, in coded or clear form, and their functions relevant to an application or interview. It is recommended that, where possible, only the coded form of the party identification should be specified, e.g. where the enterprise and the job administration are known to each other, thus only the coded identification is required.

0680 ADR, Address

A segment indicating the address of the relevant party.

0690 X GIS, General indicator

A segment specifying an indicator related to an application or interview of a person for this job, e.g. personal, written.

0700 LOC, Place/location identification

A segment giving more specific location information of the party specified in the ADR segment, e.g. internal site or building number for an interview.

0710 FTX, Free text

A segment with free text information for arrangements for an application or interview, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0720 Segment Group 18: DTM-FTX

A group of segments for giving date and time information for the application or interview and, when required, additional textual information.

0730 DTM, Date/time/period

A segment specifying the date and/or time for the application or interview of a person for the job offered.

0740 FTX, Free text

A segment with free text information for the date and time of the application or interview, in coded or clear form, used when additional information is needed but cannot be accommodated within the DTM segment. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0750 Segment Group 19: CTA-COM

A group of segments giving contact details of the specific person or department within the party identified in the PNA segment, e.g. person in the personnel department.

0760 CTA, Contact information

A segment to identify a person or department and their function, to whom communications should be directed.

0770 COM, Communication contact

A segment to identify a communications type and number for the contact specified in the CTA segment, e.g. telephone-number, fax-number, telex-number.

0780 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.

	ADR	Address
	ATT	Attribute
	BGM	Beginning of message
	COM	Communication contact
	CTA	Contact information
	DOC	Document/message details
	DTM	Date/time/period
	EMP	Employment details
	FTX	Free text
	GIS	General indicator
	LAN	Language
	LOC	Place/location identification
	MOA	Monetary amount
	NAT	Nationality
	PDI	Person demographic information
	PNA	Party identification
	PTY	Priority
	QTY	Quantity
	RCS	Requirements and conditions
	RFF	Reference
	RNG	Range details
	SAL	Remuneration type identification
	UNH	Message header
	UNS	Section control
	UNT	Message trailer

Change indicators
plus sign		An addition.
asterisk		Addition/substraction/change to a code entry for a particular data element.
hash or pound sign		Changes to names.
vertical bar		Changes to text for descriptions, notes and functions.
minus sign		A deletion.
letter X		Marked for deletion.